Tuesday, February 26, 2008

Cluster Stitch, Increasing, Decreasing

Increasing is easy to do in crocheting. One doesn't have to worry about which way the increase will lean (as one does in knitting). All one needs to do is crochet (single crochet or double crochet or ...) two or more times into the same stitch.

Decreasing is a little harder to do. But, again one doesn't have to worry about which way the decrease will lean (as one does in knitting). But, I'm going to talk about cluster sts first.

To make a cluster stitch of 3 triple crochet sts (as in the diagram at the right from a booklet from the American Thread Company), start a triple crochet st but do not do the last step. Two loops remain on the hook. Then start another triple crochet st in the same st but do not do the last step. Three loops remain on the hook. Then start a third triple crochet st in the same st but do not do the last step. Four loops remain on the hook. To complete the st, yo (as in the picture) and pull the yarn through all loops. The stitch is complete, and just one loop remains on the hook. The pattern at the right could be written as:

*cs (3 tr), ch 2, skip 2*, repeat * to *

with cs standing for cluster stitch and 3 tr showing that 3 triple crochet sts are combined to form the cs. (But, there are very few standard abbreviations in crocheting or, for that matter, very little in the way of standard terminology.)

NexStitch calls a st like this a popcorn, bobble, or puff and reserves the term cluster st to one that creates a decrease.

Decreases are made as follows: (This time, I'll use an example of decreasing in double crochet. But, "triple" or "single" could be substituted wherever the word "double" appears in the directions.) -- To double crochet 2 sts together, start a double crochet st but do not do the last step. Two loops remain on the hook. Then start another double crochet st in the next st but do not do the last step. Three loops remain on the hook (as in the picture). To complete the st, yo and pull the yarn through all loops. The stitch is complete, and just one loop remains on the hook.

Here are some abbreviations.
sc2tog -- single crochet next 2 sts together
tr2tog -- triple crochet next 2 sts together
dc3tog -- double crochet next 3 sts together.
Directions for dc3tog: Start a double crochet st but do not do the last step. Two loops remain on the hook. Start a double crochet st in the next st but do not do the last step. Three loops remain on the hook. Start a double crochet st in the next st but do not do the last step. Four loops remain on the hook . To complete the st, yo and pull the yarn through all loops. The stitch is complete, and just one loop remains on the hook.

After looking at last week's creation, I decided that I wanted it more rounded. So I frogged it to the last lace mesh row and replaced the sc row by:

Turn, ch2, skip 1, *skip 1, dc, ch1* across, ending with skip 1, double crochet together next st with the third st after that. (This takes the st count down to 9 from 15.)

(Then the buttonhole row is:)
ch 1, sc 1, ch 4, skip 5, sc 1, slip st 1.

Tuesday, February 19, 2008

a buttonhole

A horizontal crocheted buttonhole is generally made in a row of sc's simply because sc's have a little height but not much. And so, the buttonhole would have a little height but not much. The bottom of the buttonhole is the top of the last row. (Skip as many sts as the buttonhole is wide.) It doesn't have to be a row of sc's as it is here. It could be a mesh or a row of dc's or .... The top of the buttonhole is made by ch sts.

Here's what the mesh from last week looks like -- unstretched and unblocked. I ended up with 15 sts across. Then, for this go-around, this is what I did next:

Turn, ch2, sc across.
Turn, ch1, sc4 (I did ch 1 instead of ch 2 to give the edge a more rounded look. I'm going to end the row with a slip st to give the other corner a rounded look as well.)

The next question is how many ch sts to make to create a buttonhole.

The general answer is "however many sts skipped". However, ch sts stretch more than sc sts. The second picture shows this.



For the third picture, I did 1 fewer ch st than I skipped in the previous row.





And here's the final picture.

The last row is:

ch 1, sc 4, ch 4, skip 5, sc 4, slip st 1.

Wednesday, February 13, 2008

Terrycloth Kitchen Towel Hanger

Returning to the terrycloth kitchen towel that we've been working on, off and on.......
Here's where we left off:

Row 1: Sc 1 into cloth, *ch 2, sc 1 into cloth* to end.
Row 2: Turn, ch 2, sc 2 in each ch sp across, sc 1.
Row 3. Turn, ch3, dc in next st in previous row, *ch 1, skip 2, dc 1* across, dc 1.
The pattern will, in most likelihood, not work out exactly. So, you can fudge by skipping only 1 st before making the last two dc's of the row or else by ending dc, skip 1, dc.

The ch 2 at the beginning of Row 2 is a substitute for a sc. The ch 3 at the beginning of Row 3 acts as a substitute for a dc. The last st of Row 2 (and also Row 3) is made into the last of the ch sts that started the previous row.

To continue:
Repeat Rows 2-3 until there are somewhere around 10 sts across (between 9 and 15), ending with a Row 3. The picture shows the first repeat of Row 2. The first of 2 sc's is being worked into a ch sp.

Then, we will switch to a different kind of mesh. The sc's in the previous mesh gave the piece a little sturdiness that was needed due the rapid decrease in width. Now, we're going to use a different mesh pattern and not change the width.

Row 1: Turn, ch 3, *ch 1, skip 1, dc 1* across.
The ch 3 at the beginning of the row serves as a substitute for a dc. The ch 1 creates a ch sp (chain space). So, even though the row starts out with 4 ch sts, it's really a dc substitute plus a ch.
Row 2: Turn, ch3, dc 1, *ch 1, skip 1, dc 1* across, dc 1.
The last dc of the row is made into the last of the 3 ch sts that served as a substitute for a dc in the previous row. The rest of the dc's can either be made into a chain space or into a ch st (whichever, as long as it's consistent). It's much easier to dc into a ch sp than into a ch st.

Repeat these 2 rows to around 5". Next week, we'll do a buttonhole for the hanger.

-----
As a side note: Last week, I said that double triple and triple triple sts were rarely used. Well, then I joined the Antique Pattern Library Yahoo! group. The first pattern that I looked at was a large doily pattern that had dtr's in the first round.

Tuesday, February 5, 2008

Treble Crochet Stitch, etc

The treble (or triple) crochet stitch is about three times the height of a single crochet stitch. (It is called a double-triple or double-treble crochet stitch in England and several Commonwealth countries and is abbreviated d tr c, dtr, or 4-c.) In American notation, it is abbreviated tc or tr c or tr or 3-c. The photo at the right is from the American Thread Company booklet and shows both the front and back of the stitch. NexStitch has a video.
(The caption on the picture is for the double treble crochet st -- discussed later.)

This st and the other two sts discussed here are used mainly in lace edgings or doilies, etc and in Irish lace. They're fairly thin with definite space between the sts. They can be used in combination with the sc and dc sts to form shells.

Again, one starts with a single loop on the hook (and ends with a single loop on the hook). The difference is how many yo's to make. For the single crochet st, there was no yo before placing the hook through the top of a st in the previous row (or into a ch sp). For a dc, there was a single yo. For a tr c, there are 2 yo's.

Step 1. Yarn over (yo) twice. That is, wrap the thread around the hook twice (from the back over the hook to the front). There are 3 loops on the hook.

Step 2. With the yarn in back, put the hook through the top of the desired st -- or whatever (as you did for a single crochet st), yo, and draw the thread through. There are now 4 loops on the hook.

Step 3. Yarn over and draw the thread through 2 loops on the hook. There are now 3 loops on the hook. (The pic shows the yo part of this step.)

Step 4. Yarn over and draw the thread through 2 loops on the hook. There are now 2 loops on the hook.

Step 5. Yarn over and draw the thread through 2 loops. There is now only 1 loop on the hook, and the treble crochet is complete.

Going further:
One might ask oneself what would happen if one made 3 instead of 2 yo's to start out. The answer is that one would have a double treble crochet st -- shown in the pic at the right -- abbreviated dtr or d tr c or 4-c. (It is called a triple treble crochet st in England.) Here is a link to the video at NexStitch. This st is about 4 times the height of a sc. It is not used very often even in lace.

The picture at the right is of the double treble crochet st.

Similarly, one could do 4 yo's to start out. The result is a triple treble crochet st (or treble treble crochet st or tr tr c or trtr or 5-c). NexStitch has a video. (I assume it would be called a double treble treble crochet st in England.) It's about 5 times the height of a sc.